Stellite Saw Blades - DT series
Saw Blades
Stellite Saw Blades - DT series
Stellite Saw Blades – DT series of various dimensions from high quality Swedish steel and Stellite, for your thin cutting frame saw. Thin Cutting Saw Blades are used for thin cutting both kinds of wood – hard and soft. The geometry of blade edge is adjusted individually according to the use of a Stellite Saw Blade.
Find out more about our new Stellite Saw Blades – ST series…
In average the Stellite Saw Blades can be sharpened 8 – 10 times and it depends on required kerf as well on the frame saw & sharpening machine operator. Depending on the load of the blade, we recommend to adjust the blade pre-tension by rolling. You can find other details about the geometry and use of stellite saw blades in the chapter “More About Stellite Saw Blades”.
DT = Direct Tooth (common tooth)
Features of DT series blades:
- Thin Saw Kerf from 1,05 mm
- High quality Swedish steel and Stellite
- Best performance on NEVA machines
- Available as well for other vendor machines
- Simple sharpening
| Standard Stellite Saw Blades Specification NEVA | |||||
| A (length) |
B (width) |
C (body) |
Saw kerf | D (pitch) |
Max. cut. height |
| 380 | 40 | 0,6 | 1,05 | 13 | 80 mm |
| 380 | 40 | 0,7 | 1,15 | 13 | 80 mm |
| 380 | 40 | 0,8 | 1,25 | 13 | 80 mm |
| 420 | 40 | 0,7 | 1,15 | 13 | 120 mm |
| 420 | 40 | 0,8 | 1,25 | 13 | 120 mm |
| 420 | 40 | 0,9 | 1,4 | 13 | 120 mm |
| 455 | 40 | 0,9 | 1,4 | 13 | 150 mm |
| 505 | 40 | 0,9 | 1,4 | 15 | 200 mm |
| 520 | 40 | 0,9 | 1,4 | 15 | 220 mm |
| 555 | 40 | 0,9 | 1,4 | 15 | 250 mm |
| Stellite Hogger/Scraper Blades Specification NEVA | |||||
| 380 | 36,5 | 2,11 | 2,6 | 13 | 80 mm |
| 420 | 36,5 | 2,11 | 2,6 | 13 | 120 mm |
| 455 | 36,5 | 2,11 | 2,6 | 13 | 150 mm |
| 505 | 36,5 | 2,4 | 2,9 | 15 | 200 mm |
| 520 | 36,5 | 2,4 | 2,9 | 15 | 220 mm |
| 555 | 36,5 | 2,4 | 2,9 | 15 | 250 mm |
* other Stellite Saw Blades dimensions available according to your specification or drawing
Related products
